Measuring Conductivity


Measuring Conductivity
  1. Remove the protective cap and push the on/off button. 
  2. If this is your first reading today, calibrate the meter. See below.
  3. Place the meter in the water sample so the sensor is covered, but not above the vertical notches.
  4. Wait for the display to stop changing. Multiply the reading by 1000 and write it on the data sheet.
  5. Push the on/off button.
  6. Rinse, dry and re-cap the meter.

 

Calibrating the Conductivity Meter
You need the bottle of known conductivity solution.
  1. Place the meter in the bottle so the sensor is covered.
  2. Use the screwdriver to adjust the reading to match the value of the solution.

Next > Measuring Dissolved Oxygen

 

 
Make a Free Website with Yola.